Go Green
Saturday, 26 November 2011 07:39


Go Green!
The natural process to polish your marble.
by Glenn Kiyan Of Advanced Stone Restoration Hawaii
edited by Steve Patrick

In an earlier article, "Crystallization of Marble - The bad, the worse, and the ugly", I described the adverse effects of marble being polished incorrectly. In this article the correct and ecological choice of polishing marble is explained.

Polishing of stone is to attain a high shine by use of fine abrasives. Most craftsmen will use diamond abrasives to resurface an area and make it scratch-free and to remove etch marks.

To acquire a true polished or honed surface, the imperfections must be grinded or sanded to the level of the damage. Depending on the depth of damage will reflect on how many steps will be needed for the repair.

Below are all the steps listed for a full natural stone restoration. Most jobs usually require the last two steps of honing and polishing. Only an experienced specialist could recognize the proper order needed to achieve the desired finish.

Step 1:
De-lippage & Flattening: This process is usually recommended when the stone was was installed incorrectly. Lippage is the term given to uneven tiles that are set higher than one another. De-lippage/ground in place is recommended when the lippage exceeds 1/8 of an inch or if one desires to have a completely flat floor

Step 2:
Grinding: A very aggressive process using metal-bonded and diamond grits to remove deep scratches and lippage. Performed by using a heavily weighted floor machine with water, this process is typically dust free. The goal is to flatten the floor.

Step 3:
Honing: Similar to grinding, but not as aggressive. The grits and materials are not as coarse as those used when grinding. Honing will remove minor to moderate scratches and etch marks.

Step 4:
Polishing: Completed after the honing phase. A series of higher diamond grits are used. Diamond grit compounds in a powder or paste form may also be used to simulate higher grits. Using natural fiber pads or polyester pads and a floor machine, a final powdered abrasive mixed with water produces a slurry. This slurry is worked into the stone to produce a high shine.

Most natural polishing powders contain the active ingredient oxalic acid. Oxalic acid, also known as potassium oxalate, is an organic acid that is naturally occurring in many readily available plants. Hence, the term “natural polish”.

Along with oxalic acid, other natural ingredients may be mixed in the polishing powder. These ingredients may or may not include aluminum oxide, pulverized flake shellac, and organic resins. Depending on the content of calcite within a stone, a professional stone specialist can determine how to modify these ingredients to produce optimal results.

The difference between crystallization and the natural process is the resulting compound is not changed into something other than calcite. Using the natural and ecological process to polish marble and other calcite based stones, a natural finish allows the stone to breathe and not suffocate. The stone is allowed to extract moisture from the air when it becomes dry, and also push excess moisture when it becomes to wet.
Stone professionals using the natural process extends the life of your marble and other calcite based stones such as travertine and limestone. A long lasting beautiful and easy to maintain polished floor is the end result.


Last Updated on Wednesday, 30 November 2011 22:17

Contact Us

Christopher Soderlund
Stone Specialist

Boston Area

(508) 734 - 0435

Cape Cod

Give us a call to have your natural stone professionally evaluated today.


The Stone Repair Network is dedicated in providing quality restoration, repair and maintenance through a network of stone repair professionals. Our network is committed to the education of both the consumer and the industry in the advancement of stone restoration.

Better Business Bureau

Case Study 1 & 2

Marble Floor Polishing

Marble flooring is one of the best ways to add elegance to any room. However, as is with most materials, proper maintenance is required to keep your marble floors looking beautiful.

Learn more...

Marble Counter Repair

Marble countertops and furniture are a stunning focal point of many bathrooms, kitchens, bar tops, and display areas. However, when marble is used for these areas, it does require maintenance to keep it looking beautiful. Learn more...

Case Study 3 & 4

Granite Polishing

Granite Face Polishing is an art that few have mastered. When granite is scratched, etched, or worn there are several methods and steps required to refinish, and re-polish to achieve a perfect result.

Learn more...

Granite Etch Repair

Stone Seal can repair etch marks on granite.

Learn more...

Case Study 5

Terrazzo Restoration

Before calling Stone Seal, the owner of the terrazzo floor had an acrylic coating applied. As is the case with most topical coatings, dust, dirt, and sand were trapped and consequently ground into and scratching the floor.

Learn more...

Case Study 6

Soap Stone Restoration

Soapstone utility sinks like the one pictured are very common in older homes in New England. Over 100 years of use, for many different purposes has left these sinks in terrible shape. Chipping, Paint, Oils, Grease, dirt, tarnish and neglect have covered up, and damaged the natural beauty of the Soapstone.

Learn more....